Have you ever wondered how good it would be if you could change your environment with little effort without using buckets of paint, brushes, glues, dirtiness and chaos… But it’s possible! Time goes by and renovation solutions are becoming more simple and innovative. In this article, we would like to introduce you to Peel&Stick wallpapers – wallpapers that do not require glue to apply. All you need is a wallpaper, a spirit level, a pencil and a friend who will make the gluing process easier and more fun!

There is no need to be afraid of the gluing process itself, it’s quite simple. In addition, when you place an order at DeccoPrint, you will receive an installation guide, which explains how to turn the wallpaper from a sheet into art on the wall, step by step. After unpacking, you will have to allow the wallpaper to “rest” for 48 hours to adapt to the new conditions in the room – humidity and temperature. Before you get to work, make sure that you have all the necessary wallpaper sheets, as well as the tools. A stable chair or a small ladder to climb will also be useful.

Before you start, look at your walls with a critical eye to see if they are dirty, dusty, or if there are any old paint or wallpaper residue on them. However, if your walls are smooth, and you are sure that nothing will prevent the new wallpaper from sticking, all you have to do is remove the baseboards, sockets and start gluing! If you have recently painted the walls, then you will have to be patient and wait for 2 weeks until the new wallpaper is applied.

If you do not intend to glue the wallpaper from the corner of the room, draw a vertical line on the wall where you want to start gluing, using a spirit level. Remember that this line will determine how straight the rest of the gluing work will go, so it’s best to make sure you’ve been accurate. Starting from the top of the sheet, remove an area of protective film about 11 inches from the wallpaper and, holding the upper corners, glue the wallpaper to the ceiling line or at any desired height.  Once the top of the sheet is already attached to the wall, continue to take off the protective film and, with the help of a squeegee, which we have added to the order as a small gift, align the air bubbles in the direction from the center to the edges of the sheet. When the first sheet is glued, continue the same way, gluing the next sheet next to the previous one and without creating overlaps.

What do we want to tell you with this? You should not be afraid of self-adhesive wallpaper, but use its advantages, because gluing will be easy peasy! Also, these wallpapers do not damage the walls and are easily torn off. This means that you will be able to change the design of your room whenever your heart desires and implement all your long-cherished creative ideas. 

So, don’t delay the transformation of your home or workplace, take a look at the extensive design catalog, order our self-adhesive wallpapers and make sure that giving a new breath to the space can be easy and pleasant! 

About admin

administrator

Leave a Reply

Your email address will not be published.